All listings for: kaypee

Photo	Title	State	Price
	Hitec HTS-SS Advanced Upgrade Plane Sensor Combo The HTS-SS Advance telemetry sensor station works compatibly with all our existing sensors as well as the HTS-ETEMP, HTS-AS, HTS-VM and HTS-SM. Delivering on its name, the HTS-SS Advance provides more advanced telemetry capabilities than any other RC telemetry system and is capable of monitoring all types of models. It also provides engine...	South Australia	$35
	RX Switch Harness with Built in Charging Port & Battery Indicator Light A very neat switch harness that has a charging socket built into the body of the switch, it also has a sliding cover to stop the ingress of muck and debris.With this switch it gives you the ability to charge the receiver battery in situ without disconnecting any leads or even disassembling the model if you don't want to, the switch is also fitted...	South Australia	$10
	Lieber 5amp UBEC(Battery Elimination Circuit) For 2-6S Lipo Lieber Battery Elimination Circuit for 2-6S Lipo.Selectable via shunt.	South Australia	$5
	1/6 Scale WWII Germany Pilot Figure For RC Plane Really scale WWII Germany Pilot •1/6 scale •Size:76mm(Height)x72mm(Length)x48mm(Width) Package •1pc x Pilot Figure	South Australia	$5
	F-86 Sabre Alloy CNC EDF Jet 70mm Retracts, Flaps, Airbrake, EPO (PNF) The shipping may be available but we are not able to give a set price until we box and organize a courier. This F-86 has been upgraded with a balanced EDF unit.The performance will be obvious when she is maidened.The kit has been completely built but has not been flown.The ESC has also been upgraded to take care of the higher power.May...	South Australia	$265
	Canopy/Panel/Door Lock Latch (2pc) 2 Pack. This is a very neat device for securing your models hatches. This latch is spring loaded so once latched your canopy stays put! Specs: Dimensions: 23.5 x 13 x 8mm + 8mm pin length Material: Plastic / Steel	South Australia	$10
	Turnigy 3 Channel Servo Speed/Direction Regulator A fully adjustable 3 channel-out Servo Regulator which can be used on any receiver channel and will increase the servo travel time, direction and duration. Great for scale model retracts flaps and canopies where scale detail and flight characteristics are important. No more ((boing!)) cartoon like landing gear action. Weight: 3g Input: 1...	South Australia	$14.90
	2 Pack Heavy Duty Canopy/Door/Panel Lock / Latch Spring Loaded (2pc) This is a very neat device for securing your models hatches. This latch is spring loaded so once latched your canopy stays put! Specs: Dimensions: 26x16x10mm + 10mm pin Length Material: Plastic / brass	South Australia	$12
	2 Pack of Heavy Duty JR Alloy 47mm 23T Servo Arm 2 Pack of Titanium CNC Servo output arms Heavy Duty Alloy 47mm 23T Servo Arm - JR Spec: Holes: M2 Center to Outer Hole: 38mm	South Australia	$12
	CNC Machined Pull Pull servo arm for Hitec splines, holes are threaded CNC Machined Alloy double servo arm for Hitec splines, holes are threaded for M3 bolts, double M2 Spline locking bolt supplied. Specifications: Weight: 8g Dimensions: 110mm x 9mm x 3mm	South Australia	$14
	High Quality Aluminum dual 25T 96MM (3.5") High Quality Aluminum Pull Pull dual 25T 96MM (3.5") Metal Servo Arm 25T Fits; Futaba & Feetech, Savox?Xcore?HL?HSP?HD power?Go tech.	South Australia	$12
	2 Pack of JR Alloy Heavy Duty Servo Arm 37mm x M2 2 Pack of these tough servo arms. Alloy Heavy Duty Servo Arm 37mm x M2 - JR	South Australia	$12
	Hitec Aurora 9 & 9X 2700mAh 20C Lipo Transmitter Pack Will require changing of the connector. Product description Introduction: Brand:HUBSAN Model number:H501S-14 Voltage:7.4V Capacity:2700mAh Compatible with:Hubsan H501S H501A H501C H501M Charging Time:150 minutes Package Includes: 1 x Lipo Battery...	South Australia	$29
	220V 40W High Quality Fine Tip Soldering Iron This is the Black And Purple Version. Specifications: Work voltage:220V Rating power:40W Wall plug type: 2 square pins (U.S. standard) Includes/Requires: Includes: 1 x 220V 40W Soldering Iron Requires An Aussie plug Adaptor.	South Australia	$14
	KEDA 63-64 190KV Brushless Outrunner 10S 2000W The KEDA 63-64 190KV High Voltage motor is a smooth running, high quality brushless outrunner designed for the larger RC model aircraft! The prop may be fitted directly to the motor shaft using the supplied adapter set which allows for front or rear mounting. In testing this motor produced up to 2000W of power...	South Australia	$70