Phoenix Model 1:5 Piper J3 Cub .46-.55 FULLY ASSEMBLED- CLIPPED WING Airplane - NEVER FLOWN

If you need more photos -send me your email address and I'll send them -regards Pete81
I have far too many planes, built-never flown and have run out of room--need to reduce my stock.
Selling way below cost.
--any questions please ask.
This is a Phoenix Model 1:5 Piper J3 Cub Converted to a ''Clipped Wing'' J3 CUB
Size .46-.55 GP EP
Wingspan 1865mm (74.4in)
RTF -FULLY ASSEMBLED
THIS IS FULLY ASSEMBLED and COMPLETE
-Just add lipo and BIND with your Tx
Yellow/Black ORACOVER
Installed-SunnySky X3525-5 650kv III
Installed-Sunnysky EOLO 16x8 Propeller
Installed -5x SERVOS-JX 4409MG Low Pofile 9kg Digital Metal Gear
Installed-DUBRO J3 CUB LOW BOUNCE WHEELS
Installed-LEMON RX 6CH Receiver
Installed-HOBBYWING Skywalker 80A V2 ESC(8a) +EC5 Connector
Installed-all cables and wires,control horns etc
Installed-
Re-designed Firewall and Battery Bay area allowing more forward positioning of Lipo Battery.
Re-designed ''clipped wings'',including placement of wing struts to remain accuray in scale.
Easy Removeable wings for transportation -T pin and Clip
1/5 Scale
J3 CUB ''Clipped Wing'' -weight---3967g + SunnySky X3525-5 650kv III (80a ESC) +5S 4200mAh (510g) =4477g Total Weight.
APC15x4 47a @ 4700 Static Thrust
### EOLO 14x7 48a @ 4600 Static Thrust

PICKUP ONLY
from Grovedale,Geelong,Vic 3216

Purchased NEW -then Modified -NEVER FLOWN.