Leaving hobby so I'm selling my enclosed trailer. Was built and used for model aircraft. Has 3 big doors allowing full access with 2 small front doors which i have boxed off to make a storage room for camping gear and fuel. This wall can be removed to allow full use of the 3.9x1.8m floor. There is also a shelf above the small doors which can be made into cabinets or left open. Chassis is 100x50rhs with 50x50 used for frame and 40x40 for the doors. Trailer is skinned with Dibond glued not screwed. Gas struts hold the doors up fine without sagging. Floor is a good height to sit on with the large doors providing shade. It has 240v input wired to 2 double pole power points inside. It is 500kg tare. External Box size is 4050 x 2200 including handles. Overall length is 5950 drawbar to rear. Floor size is 3900x1800 Topshelf is 870 above the floor. Floor to roof clearance is 1500, side door clearance is 1350. Rear door width clearance is 1500 with 2900 on the side doors. This was so that my 2400x1200 table fits in easily. There is room underneath to cut doors on the side for toolbox/storage infront and behind the wheel. Also a large rear ute style draw can be fitted to make use of space between chassis rails. Models not included.