Unfortunately there is no postage or freight delivery, pick up only from Devonport or I can meet you on the track if you live in Tassie. This plane is not suitable for a beginner.
You can have the woodwork and cowling and covering for $80 You can have the finished plane as it is shown in the pictures. For $250
4 pieces of TGY 4409 DS.MG low profile 10kg servos (aka PDI 4409MGD clone). Lots of DuBro hardware and a c.f. landing gear 900W outrunner producing 3.2kg of thrust on 11x5.5" APCe (runs luke warm, just like the battery and esc). TGY AE-100 esc with 5/6V 4A linear BEC (Hobbywing Platinum clone). Has been balanced n maidened and flies straight and level. Has a good turn of speed (approx 100km/h) despite the 3" thick symmetrical wing section. Slows to a medium pace for landing. Settles nicely into a glide on approach. Flight time; about eight minutes on 5800mAh/60C
You will need a four cell 5-6Ah 40-60C lipo battery. A transmitter and receiver will also be required.