Selling my FPV Skywalker and associated long range FPV gear and antenna-tracking ground station. Complete setup that is tested and flying reliably. It's been faultless since initial build a couple of years back. Onboard stablised video recording, pan tilt, 3x flying live-view cameras with remote switching, OSD, artificial horizon etc etc.
Email for more photos.
Skywalker Summary specs:
+ 1720mm wing span, EPO foam with 15g fibreglass reinforcement + Comfortable 1hr flight time per Lipo + 60km/h cruise + Eagletree OSD Pro with Vector flight controller; GPS, heading hold, RTH etc + Scherrer Rx700LR 12ch diversity 433mhz receiver + Tarot brushless gimbal for Gopro (SJ cam) - pan/tilt control from TX, or head tracker + 3x onboard camera with camera switcher; fixed in nose, fixed on T-tail, live stabilised Go-Pro out + 1.2ghz Lawmate video 1w, 433mhz Scherrer LRS for control + Hitec HS65MG servos on all flying surfaces + Redundant onboard power supply + 80A Turnigy Plush ESC + Scorpion brushless motor + 2x 10000mah 4s Multistar Lipo + Removable wing
Video Ground Station Specs:
+ Tripod-mounted Eagletree Eagle Eyes + Complete two-axis antenna tracking + 2x Lawmate 1.2ghz receivers: one with linear crosshair antenna, one with dipole + 2x BlueBird servos for antenna tracking + 15inch 12v TV for live display + USB video capture dongle to record live input on your phone + 25mw 5.8ghz video relay to FPV goggles
Control Ground Station Specs:
+ Tripod-mounted Scherrer Tx700 Pro 433mhz transmitter + FrSky RSXR receiver feeds Scherrer using an SBUS to PPM converter
Currently bound to FrSky, however you can substitute another receiver easily to output PPM to the Scherrer. This allows you to use your existing TX and gives ample physical seperation between video receiver station and control transmitter station.