New product new local stock
HSD JETS New product full composite J10A developed in 2023. ETA Australia July 2023. Pre order accepted, New MFC 2805 Pro version, supporting S-BUS of many radios with gyro & compensation steering adjustment functions for PNP version

SPECIFICATIONS:

Wingspan 1300mm (51.2in)
Length 2155mm (83in)
Weight for takeoff 9kg (with full fuel, battery, and turbine engine)
Turbine Engine 6-14kg or more thrust engine for 3D
Cruising speed 160-180 km/h (For reference only)
Flying time 4-6 mins (full throttle) (For reference only)
Wing area 54 dm2
Wing load
Main material full composite
Painting surface Gloss metal paint
Suitable experience level Zero basis ?Beginner ?Intermediate ?Advanced
KIT Assembly difficulty 10mins -30mins -60mins
Suitable for ambient temperature 0-40.
Radio System 10 channel (required & not included)
Control System MFC-2085 PRO w/gyro (required & not included) PNP included
Servos(required & not included)

PNP included

7.4V 40g×3 Metal gear GDW brand for 2 x vector and 1 x canard wing
7.4V 25g×3 Metal gear for 2 x ailerons
7.4V 12g×1 Metal gear with 300mm lead (Nose wheel steering reverse)

Recommended Battery 2S,7.4V, 2200-3200×2,LiPo with XT60 type plug(required & not included)
Ailerons Yes
Flaps No
Elevator(Horizontal tail) Yes
Rudder(Vertical tail) Yes
The smoke system No
LED lights system Selective configuration (not included) ONLY LIGHT FOR LANDING GEAR
Vectoring nozzle system Yes
Electromagnetic brake system Selective configuration (not included)
Reinforced gyro Selective configuration (not included)
Packaging / Size Packing Box + Outer Box(Card mark)/58.39×23.78×15.75(inch)
CG (Center of Gravity) mm from the leading edge of the Main Wing
Landing Gears Scale landing gear included for PNP version with light
Battery Charger
LiPo battery charger (required & not included)

Key Features

Scale composite material based on the success of J10A foam version.
Crisp and clean airframe mouldings.
Includes MFC-2085 PRO Version 2022 multi-function flight controller. for PNP
Minimal assembly time.
Wing-mounted connector blocks for aileron, flap and light wiring.
Scale all-moving tailplane.
Pre-finished (painted airframe components.
Pre-installed jet pipe.
Pre-installed fuel system.
Pre-fitted UAT.
Pre-fitted smoke system.
Scale tanker refueling system.

Fully equipped landing lights.
Main wheels equipped with electromagnetic braking.
Operational speed brakes.

High strength, 4-point, metal, dual control horns.
Industry leading packaging aids storage and prevents transport damage.
What's in the Box

1x Pre-painted and finished two-part EPO fuselage moulding.
1x Pre-painted and finished EPO wing set.
1x Pre-painted and finished EPO tailplane set.
1x Pre-painted and finished EPO fin and rudder.
1x Pre-installed, all metal, scale, oleo style electric retractable undercarriage with brakes.
1x Pre-installed aluminium wheel set with durable rubber tyres.
1x Pre-installed fuel system with UAT.
1x Pre-installed smoke system.
1x Pre-installed jet pipe.
1x Wing and tail spar set.
15x Pre-installed metal gear digital servos.
1x Pre-fitted LED navigation and landing light system.
1x Pre-installed Multi-function flight controller. MFC 2805 PRO new version 2022
1x Hardware pack.
1x Comprehensive instruction manual.
1x Comprehensive ICS instruction manual.
Needed to Complete

1x 9/11-channel transmitter and receiver combo.
1x 6 - 14kg turbine. for 3D hovering, 12-17kg
2x 2S 7.4V 2200 to 3700mAh LiPo with XT60 connector.
1x 2S 7.4V LiPo as directed by engine manufacturer.
Technical Specifications- Weights & Dimensions