Hi guys, Again, as per my other reluctant sales due to downsizing I am putting this up for sale unopened. Happy to sell for $750 as kit and servo ready for any setup you want to add mini turbine or edf or 6s like the spec here below for $940 (the unused 6s Delux inrunner gear is worth $400+)
Happy to post as it’s in its original box, likely about $40 to $50...
The Yak-130 is powered by a massive 4068-1680kV motor and Hobbywing 130A ESC, and with its 12 blade fan with metal housing, the Yak sounds every bit as good as it looks. If you typically fly 5 and 6 blade EDF jets, you'll be blown away at the sound this 12 blade EDF produces. While 5 and 6 blade EDF produce a high pitched whining sound, the 12 blade EDF with metal housing produces the "whoosh" and air crushing sound similar to a gas turbine jet. If you are a scale jet flyer looking for top of the line quality and superb detail, the Freewing Yak130 will not disappoint.
FEATURES: Incredible scale details including two hand painted pilots, full instrument cockpit, scale canopy, full compliment of ordinance, sequenced gear doors, and Russian Air Force graphics 12 Blade factory balanced EDF with metal housing combined with 4068-1680kV brushless inrunner motor produces realistic jet turbine sound Composite fan blades combined with metal EDF housing make the Yak-130 AMA compliant (the fan blades themselves are NOT metal, so there are no flying restrictions) Heavy-duty 130 Amp Hobbywing ESC with 8A UBEC Flight surfaces are controlled with 17g digital metal gear servos for precise movement, strength and long life Ultra-bright LED landing and navigation lights for enhanced realism and dawn/dusk maneuvers Electronic retractable landing gear with aluminum shock absorbing struts and sequenced gear doors Upgraded pushrod clevis and metal ball head buckle provide a robust connection between servo and control surface and eliminate "play" Full function flaps allow shorter take-off distances and slow, scale landings Carbon spars and EPO foam construction provide the perfect balance between strength and flexibility Nylon hinges on all control surfaces (superior to foam hinges) Motor, servos, ESC and EDF come pre-installed for your convenience
PRODUCT SPECIFICATIONS: Wingspan: 1200mm / 47.2in Length: 1500mm / 59in Flying Weight: 4000g / 141oz Power System: 4068-1680kV Brushless Inrunner Motor Electronic Speed Control: 130A, 8A UBEC, EC5 connector Propeller / EDF: 90mm metal housing with 12-blade impeller Servos: 9g and 17g digital metal gear servos Landing Gear: Nose and main gear have electronic retracts with shock-absorbing aluminum struts Required Battery: 6S 22.2V 5000-6000mAh 40C LiPo Required Radio: 6 Channel (7 channel for wind break) Ailerons: Yes Elevator: Yes Rudder: Yes Flaps: Yes Lights: Yes Hinge Type: Nylon hinges Material: EPO Foam Skill Level: Expert Build Time: 2 Hours Recommended Environment: Outdoor