http://www.rctrader.com/index.php http://www.rctrader.com/category/349/GasPetrol/listings/2867/traxxa-jato-33-*MINT*.html http://www.rctrader.com/index.php?a=2&b=2867 Sat, 19 May 2012 08:40:15 +1000 Description:
Mint Condition Only Used 1 time




JATO 3.3 (#5507) SPECS






Length

­

16.53" (420mm)



Front Track

­

12.87" (327mm)



Rear Track

­

13.00" (330mm)



Weight (no fuel)

­

83.03oz (5.19lb) (w/4AA in rear + wheelie bar)



Height (overall)

­

5.70" (145mm)



Wheelbase

­

11.22" Long (285mm)
11.14" Short (283mm)



Wheel Diameter

­

2.85" (72.4mm)



Tire Diameter

­

4.13"(105mm)



Front Tires

­

Anaconda™ 4.1 Inches (105mm)



Rear Tires

­

Anaconda™ 4.1 Inches (105mm)



Front Wheels

­

2.8" All-Star™ Mirror-Chrome



Rear Wheels

­

2.8" All-Star™ Mirror-Chrome



Front Shock Length

­

3.43" (87mm), GTR™ Aluminum



Rear Shock Length

­

3.43" (87mm), GTR™ Aluminum



Gear Ratio (1st Gear)

­

9.77:1 (total gear reduction)



Gear Ratio (2nd Gear)

­

7.29:1 (total gear reduction)



Gear Pitch

­

32 (0.8 Module)



Steering

­

Bellcrank w/ Integrated Servo Saver



Transmission

­

Auto Two-Speed



Differential Type

­

Hardened-Steel Bevel Gear, Sealed



Drive System

­

Shaft-Driven 2WD



Chassis Type

­

3mm Plate, 6061-T6 Aluminum



Radio System

­

TQi™ 2.4GHz



Engine (fuel-powered)

­

TRX® 3.3 Racing Engine



Brake Type

­

Semi-Metallic Disc with Steel Pads



Fuel Tank Capacity

­

75cc



Top Speed

­

65+mph



­

­

­





]]> http://www.rctrader.com/category/337/AccessoriesOther/listings/2868/Trim-Air-SLR-1000-Retracts-Unused.html http://www.rctrader.com/index.php?a=2&b=2868 Sat, 19 May 2012 08:40:15 +1000 Description:
Trim Air SLR 1000 Series Air Retracts. Trike set. Never used. Includes air valve, fill valve, 'T' pieces, air line & air tank. Takes 7/16" (11.1mm) struts and handles up to 12kg models.



]]> http://www.rctrader.com/category/335/Wanted/listings/2869/WTB-CARF-Eurosport.html http://www.rctrader.com/index.php?a=2&b=2869 Sat, 19 May 2012 08:40:15 +1000 Description:
If anyone knows of a CARF Euro Sport for sale (Prefer airframe and L/G only but will consider full running gear) as Im looking at one for a full 3D conversion.
Condition isnt too important as able to repair if necessary.
Ian - 0417953213 or info@baintek.com.au


]]> http://www.rctrader.com/category/309/Electric/listings/2842/4-x-Fly-Fly-kits.html http://www.rctrader.com/index.php?a=2&b=2842 Fri, 18 May 2012 09:45:12 +1000 Description:
Have following Fly Fly ARF kits to sell.
( I originally bought 2 of each ) All unpacked in original boxes Clearance prices
Hawk EPO EDF 1365mm wingspan $120
F86 EDF 1420mm $120
Check out the forums, these fly great.
Yak 54 Fibreglass body built up wings 1385mm wingspan $95
Freebird warmliner 1500mm wingspan $80

Location Gold Coast
Can deliver to Brisbane

]]> http://www.rctrader.com/category/335/Wanted/listings/2863/Wanted-2xDLE-20s.html http://www.rctrader.com/index.php?a=2&b=2863 Fri, 18 May 2012 09:05:43 +1000 Description:
Wanted - 2 DLE-20's or similar petrol motors for a twin project. Prefer new but will consider used.



]]> http://www.rctrader.com/category/341/GasPetrol/listings/2859/Topflite-15-P-51D-Mustang.html http://www.rctrader.com/index.php?a=2&b=2859 Fri, 18 May 2012 09:05:43 +1000 Description:
For sale is the top flite P-51 D Mustang kit that has been completed and glassed.

It comes with:

Robart retracts and oleos for the TF P-51,
Robart retractable tail wheel
Robart Large Delux air control kit
5" Du-bro wheels
Carbon/glass Landing gear doors for both inner and outer doors.
Dave Brown 5" Parabolic P-51 spinner
2x Top flite cockpit kits, one of which has already been painted, just needs final detailing and installation

Can ship Australia wide, but buyer to pay actual shipping costs at the time of shipment.

Thanks

dave

]]> http://www.rctrader.com/category/364/GasPetrol/listings/2865/Mintor-220.html http://www.rctrader.com/index.php?a=2&b=2865 Fri, 18 May 2012 09:05:43 +1000 Description:
Mintor 220 with headers and canisters.

Smooth and powerful.

Motor is too big for my needs.

May part trade DA170 or DA120

]]> http://www.rctrader.com/category/359/Transmitters/listings/2860/JR-DSX-9.html http://www.rctrader.com/index.php?a=2&b=2860 Fri, 18 May 2012 09:05:43 +1000 Description:

For Sale as I have purchased an 11X

Perfect condition

9 Channels
30 Model Memory

Currently Mode 2 but easily changed to mode 1

No receivers included


]]> http://www.rctrader.com/category/322/Electric/listings/2861/ALIGN-3GX-FLYBARLESS-SYSTEM-V12.html http://www.rctrader.com/index.php?a=2&b=2861 Fri, 18 May 2012 09:05:43 +1000 Description:
Brand new - sealed box - Align 3GX Flybarless control system Ver 1.2. Surplus to needs.

Shipping by ordinary post included at no charge.

]]> http://www.rctrader.com/category/341/GasPetrol/listings/2866/Free-Damaged-Sig-Extra-300XS.html http://www.rctrader.com/index.php?a=2&b=2866 Fri, 18 May 2012 09:05:43 +1000 Description:
This plane has served me very well but on the last outing it had a mid-air with a big foamy and came out with some damage, mostly caused by a hard landing. It's been hanging in the garage for 4 months and it's not getting repaired any time soon. So - it's yours for free if you come pick it up. I'll even throw in most of the materials you'll need to repair it (balsa, covering, fiberglass cloth).

The plane was fuel proofed extensively when built and there are no signs of fuel damage. The hardware was all upgraded (Robart hinges, stainless steel control horns, etc..). It's a great plane, nice size, flys like it's on rails.

Damage includes:
- A broken wing spar
- Landing gear separated from fuselage
- Some covering damage to wing, fuse
- Wheel pants broken

I'd estimate it would take a couple of evenings for a competent builder to fix it.

This deal is airframe only (plus your word that it will fly again). First in, best dressed.

I can supply a motor and electronics for this plane for additional cost.

Call me to make arrangements.



]]> http://www.rctrader.com/category/340/Electric/listings/2862/Herculese-78-Wing-FPV-complete.html http://www.rctrader.com/index.php?a=2&b=2862 Fri, 18 May 2012 09:05:43 +1000 Description:
1 x crashtest.com Hercules 78" wing
2 x Hyperion 3019/10 Brushless outrunners
2 x 10x7 APC props
2 x Pulso 60A opto ESC`s
1 x 5A BEC
4 X metal gear servo`s
2 x 9g servo`s
1 x 900MHZ 800mW Tx/Rx & 1/3-inch CCD Camera PAL System
1 x FOXTECH FY31AP 8 waypoint aircraft autopilot with GPS
1 x FOXTECH Hornet OSD
1 X Spectrum AR9000 Receiver


Set up for 2 x 4000 3s or 2 x 5000 3 s lipos. Very easy to hand launch or ground launch. Easy to fly with broad flight envelope. Has only been flight tested with 3 flights. Full heads-up display, auto balance, return to home and auto circle.

Due to size, pick up only unless you can arrange transport

]]> http://www.rctrader.com/category/360/Accessories/listings/2855/Hitec-servo-programer-HFP-10.html http://www.rctrader.com/index.php?a=2&b=2855 Thu, 17 May 2012 08:54:15 +1000 Description:
Hitec HFP-10 Servo Tester /Digital Programmer. Works for all brands of servos with a Universal or Futaba J style connector. 44410
Features
 Aluminum case, with a LCD display.
 Adjustment knob, ON/OFF switch
 Uses an internal 1100mAh, 4.8V NiCd battery.
 Charge unit is located at the end of the unit.
 Designed for use with any overnight charger
 Programming Features: For Digital Servos:
Factory Default Resets
Fail Safe ON-OFF
Dead Band Width Adjustments
End Point
Directional Rotation
Neutral Point
Speed of Rotation
Fail Safe Point Preset
 Features for Standard Servos:
Checks any brand of servo with a Manual test and Auto scan.
Plus it will check the Pulse width and Voltage.
Checks the transmitter signal pulse as well.
Specifications
 Length: 5-1/2 (138mm)
 Width: 3" (76mm)
 Height: 1" (25mm)
Buyer to pay postage

]]> http://www.rctrader.com/category/364/GasPetrol/listings/2853/NGH-GT17cc.html http://www.rctrader.com/index.php?a=2&b=2853 Thu, 17 May 2012 08:54:15 +1000 Description:
Up for sale is my NGH GT17cc engine in it's box which I've opened to look at but it's never been mounted.


Specifications:
Engine Type - Gasoline Two-stroke, Air Cooled, Rotary Valve
Cylinder Type - Precision Steel Sleeve
Cylinders - Single
Crank Type - Forged Dual Ball Bearing Support
Mounting Type - Beam or Rail Mount
Carburetor Type - Walbro WT Series
Carburetor Mounting - Front
Crankshaft Threads - 5/16" X 24 TPI
Mounting Dimensions - Owners Manual or Website
Ignition: RCEXL 1/4-32 90 Degree Single Cylinder
Spark Plug Type - 1/4" X 32 TPI
Displacement -1.02 cu in.(16.91cc)
Bore - 1.14 in. (29mm)
Stroke - 1.01 in (25.6mm)
Engine+ Muffler+ Ignition (Total Weight) = 1 lb. 14 oz. (850g)
Prop Range - 14*8,15*8,16*8
RPM Range - 2100-9000
Fuel - Unleaded Gasoline With High-Quality Two-Cycle Oil, Pre- Mixed
Compression ratio - 10
Pre-Mix Oil Ratio and Type - Synthetic Break-in with 20:1, General 25:1, For Air Cooled Engines
Performance :
Prop RPM
JXF 14*89000
JXF 15*8 8000
JXF 16*8 7000

]]> http://www.rctrader.com/category/364/GasPetrol/listings/2850/50-60cc-Canister.html http://www.rctrader.com/index.php?a=2&b=2850 Wed, 16 May 2012 08:15:49 +1000 Description:
Bought this exhaust for a project but it wasn't possible to fit it into the airframe.

Never been fitted into a model.

Included are:
- Aluminium Canister
- Stainless Steel Flexible Header
- Teflon coupler with two spring clamps.

Details:

Stainless Steel Flexi Header
330mm from centre of exhaust flange to tip
Corrugated section 200mm long and 34mm Diameter
Tail Section 100mm long
25mm Diameter Outlet

Canister muffler
280 mm long not including pipe
60mm Diameter Body (62mm at weld seam)
25mm Diameter Inlet pipe
16mm Outlet


Suits many engines in the 40 - 60cc per cylinder class with ~42mm bolt hole spacing on exhaust header such as DA50, DLE50/55, MT50/57, CRRC etc.

Weight:
Canister = 250 gram
Flexi Header = 130 Gram
Both Clips = 15 Gram
Teflon Coupler = 25 Gram.
Total Weight = 420 Gram.

If you have any questions let me know.

]]> http://www.rctrader.com/category/340/Electric/listings/2848/Extra-300-Parzone.html http://www.rctrader.com/index.php?a=2&b=2848 Wed, 16 May 2012 08:15:49 +1000 Description:
Hi, my name is Gael, i'm a backpacker from Belgium and i'm going back home next tuesday.
I'm so selling the extra 300 parzone that i flew all around Australia.
It has travelled in the car for a long time, so a lot of small scratches but in good flying condition. The plane is sold with the stock motor and stock servos b ut with no speed controler.
Thank you

Gaël

]]> http://www.rctrader.com/category/341/GasPetrol/listings/2852/Hangar-9-Frenzy-100.html http://www.rctrader.com/index.php?a=2&b=2852 Wed, 16 May 2012 08:15:49 +1000 Description:
For Sale Hangar 9 Frenzy 100

Saito 125 GK
HexTronik HX12K all round
Keleo Pitts muffler fitted
still have original muffler as well
two cowls one for orginal and for pitts muffler
hardly any run time but a truelly great flyer


]]> http://www.rctrader.com/category/341/GasPetrol/listings/2851/Great-Planes-Pitts-m12.html http://www.rctrader.com/index.php?a=2&b=2851 Wed, 16 May 2012 08:15:49 +1000 Description:
For Sale Great Planes Pitts M-12S mostly built up by someone else when I swapped for it done nothing to it since

I have purchaced all items to complete just add rx

DLE-55 in box
23X8 carbon prop
Miracle drill guide
miracle dual switch and fuel dot
servo savers
servo extension leads
rexcel opto kill switch
aluminium spinner
7 x HiTec HS-7985MG Digital Servos

Living in city so no time to get to field so no interest in building up (pity) and my interest is mainly in gliders

]]> http://www.rctrader.com/category/312/Sailplanes/listings/2834/Glider-Fuselage.html http://www.rctrader.com/index.php?a=2&b=2834 Tue, 15 May 2012 09:10:07 +1000 Description:
Brand new Fly-Fly DG-1000 fibreglass fuselage still in original foam/plastic wrap and box. 1130mm length. Servo tray fitted. Canopy and liner included. $55 firm

I may deliver 100kms radius from home - Bribie Island - by arrangement otherwise buyer pays freight.

I don't seem able to attach photo here so please email for photo, phone number, further details - alannw@bigpond.com



]]> http://www.rctrader.com/category/367/F3x/listings/2838/Baudis-Big-Ceres-Strong-Glider.html http://www.rctrader.com/index.php?a=2&b=2838 Tue, 15 May 2012 09:10:07 +1000 Description:
Selling this model as getting out of the hobby.

Beautiful red and yellow model. Double carbon wings and 2.4g friendly fuz.

Three quarters built with just the RDS in the wings to complete. Servos mounted in the tail, all wiring looms completed.

Comes with 4 x MKS 6125 glider servos in wing and MKS 6125 minis for elevator and rudder.

Cost over $2,600 new.

]]> http://www.rctrader.com/category/368/Other/listings/2839/Baudis-Carbon-Banana-DS-Glider.html http://www.rctrader.com/index.php?a=2&b=2839 Tue, 15 May 2012 09:10:07 +1000 Description:
Selling this model as getting out of the hobby.

Great yellow with blue colour scheme. This is the carbon version with wipers on all control surfaces.

Hyperion DS095 digital servos in wing, MKS 450 digital servos for v tail. Comes with 4 cell AAA flight pack and Spektrum 6255 2.4 ghz RX.

Never crashed or scratched.

]]>